JL Audio MVi Marine Amplifier, 5 Channel Marine System Amplifier (700 watts) – MV700/5i

Description

Build an audio system with amplification selected for the speakers and listening zones on your boat. JL Audio MVi Marine Amplifier, 5 Channel Marine System Amplifier (700 watts) – MV700/5i adds a dedicated power stage to a compatible setup, with the exact model and supply requirements set out below.

Choose the right configuration

• Manufacturer part number: 010-03340-00
• Supplied model: MV700/5i, Amp, JLA, (98650)
• Exact variant: 5 Channel Marine System Amplifier (700 watts)
• Selected configuration: 5; 700 W
• Physical dimensions (Height): 52 mm (2.05")
• Physical dimensions (Width): Monoblock (600 W)/2/4-Channel: 11.20" (285 mm) Monoblock (1000 W)/5 (700 W/1000 W)/6/8-Channel: 13.96" (355 mm)
• Physical dimensions (Depth): 176 mm (6.93")
• Weight: Monoblock/2/4-Channel: 2.27 kg (5.0 lbs) Monoblock (1000 W)/5 (700 W/1000 W)/6/8-Channel: 2.54 kg (5.6 lbs)
• Operating voltage: 10-15 VDC
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth): Analog Inputs: Monoblock (600 W): 90 dB Monoblock (1000 W): 87 dB 2/4/6/8-Channel: 99 dB
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth): Analog Inputs – Main Channels: 5-Channel (700 W / 1000 W): 99 dB
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth): Analog Inputs – Subwoofer Channel: 5-Channel (700 W / 1000 W): 99 dB

What is included

• MVi amplifier
• Power connector
• Speaker output harnesses
• 6-foot USB A/B cable
• RCA Terminal covers (installed)
• Four stainless steel mounting screws
• 2.5 mm Allen wrench
• 3 mm Allen wrench

Before you order

Check the exact mounting dimensions, speaker impedance, amplifier matching and electrical supply before installation. This product is intended for its documented audio function; other equipment shown in a system illustration is not included unless listed above.